Power & Energy
Heat exchangers for power plants in the UAE: HEI-standard condensers, coolers and heat recovery equipment for conventional and renewable generation.
View Sector
Equipment
Radiators
Industrial, heavy-duty, automotive and agricultural radiators — custom-built, re-cored and repaired in the UAE for 50°C ambients.
Scroll Down
How It Works
A radiator rejects engine or system heat to air: coolant flows through finned tubes while air is driven across them by fan or vehicle motion.
- 1
Hot coolant from the engine enters the top or side tank and distributes into the core tubes.
- 2
Fin surfaces bonded to the tubes multiply the air-side area.
- 3
Fan or ram air carries heat away; coolant returns to the engine cooled.
- 4
Core geometry — rows, fin density, tube type — is matched to heat load and the dust/ambient environment.
Built to
Solve
Engineered against the specific failures that cost operators downtime, contamination or wasted energy.
Asset protection
An overheating engine is minutes from major damage — radiator capacity is the margin between a hot day and a seized engine, and that margin shrinks every season the core goes uninspected.
Process integrity
Generator and plant cooling designed for European ambients fails in Gulf summers exactly when load peaks — the OEM's home-market design temperature and the Gulf's actual ambient are rarely the same number.
Operational efficiency
Waiting weeks for an imported OEM radiator idles machines a local re-core returns to work in days, at a fraction of the freight and lead-time cost of a replacement unit.
Why Dolphin Group for
Radiators
Built for this climate
Every core is rated for real Gulf summer ambients — not European catalogue conditions.
Speed of local manufacture
Re-cores and repairs in days from Mussafah keep fleets and generators earning.
Engineering-backed uprating
Heat exchange engineering — not guesswork — behind every capacity upgrade.
Key
Benefits
What sets radiators from Dolphin Group apart, in specific and measurable terms.
- 1
Custom-built cores
Custom cores built to original dimensions — including obsolete models no longer supported by the OEM.
- 2
Days, not weeks
Re-core turnaround in days versus weeks for OEM imports, keeping equipment off the sidelines.
- 3
Uprated for Gulf duty
Uprated cores engineered for Gulf ambient and heavy duty cycles, not a temperate-climate default.
- 4
Material flexibility
Copper-brass and aluminium construction capability, matched to the application's duty and budget.
- 5
Every unit verified
Pressure testing and flow verification on every unit before it leaves the workshop.
- 6
Fleet programmes
Fleet programmes that cut cooling-system downtime across an entire equipment population.
Technical
Specifications
Design codes, materials and testing scope confirmed for every radiators order.
Types
Industrial · Heavy duty · Automotive · Agricultural
Construction
Copper-brass · Aluminium · Steel frames
Services
New manufacture · re-core · repair · pressure test
Capacity
Small automotive to multi-MW generator cooling
Turnaround
Repairs in days · custom builds in weeks
Where It's
Used
Radiators in service, sector by sector, application by application.
Automobile & Aviation
Radiators and cooling systems for automotive and aviation: high-performance cooling where thermal margins are measured in grams and seconds.
View Sector
Oil & Gas
Heat exchangers for oil and gas in the UAE: thermal equipment engineered for upstream, midstream and refining service, built and serviced in Abu Dhabi.
View Sector
Steel & Metallurgy
Steel plant heat exchangers and cooling equipment: furnace cooling, quench systems and dust-laden gas coolers built for the hardest environments in industry.
View Sector
Marine & Offshore
Marine heat exchangers built in Abu Dhabi: compact, seawater-tolerant cooling systems for vessels, rigs and offshore platforms.
View SectorAgriculture
Tractor and harvester radiators built for dust and heat.
Frequently Asked Questions
Yes — we reverse-engineer tanks, frames and cores from the existing unit and rebuild to original or uprated capacity.
Typically 3–7 days depending on core availability, versus weeks for OEM imports.
Copper-brass for repairability and harsh duty; aluminium for weight and cost on lighter applications.
Yes — extra rows, higher fin density or larger cores are engineered to raise capacity within your envelope.
Yes — genset radiators from small standby units to multi-megawatt packages are core business.
Every radiator is pressure tested; flow verification is available on request.
Yes — scheduled radiator service programmes with exchange stock keep fleets moving.
Send photos, dimensions or the unit itself to our Mussafah workshop — walk-in assessments are welcome.
Talk to an Engineer About Radiators
Send your duty requirements or existing datasheet, and our engineers will confirm the right configuration.